Hydraulics & Pneumatics
MANUFACTURED IN THE UK
MANUFACTURED IN THE UKNYLON 12 TUBE
Nylon12 is a very stable material, giving excellent resistance to chemicals and oils and it has an extremely high abrasion resistance. Its molecular structure makes it very tough and durable and therefore an obvious choice in the Hydraulics & pneumatics industry.
PROPERTIES OF NYLON
- Very good physical properties
- Moisture has significant effect on properties
- Very good heat resistance
- Excellent chemical resistance
- Excellent wear resistance
- Suitable for ‘push fit’ fittings & pneumatic control systems
- Available in Natural, Black, Red, Green, Blue & Yellow
| O/D (mm) | I/D (mm) | PSI | Coil Length |
| 4.0 | 2.5 | 400 | 30m/100m |
| 5.0 | 3.0 | 400 | 30m/100m |
| 6.0 | 4.0 | 350 | 30m/100m |
| 8.0 | 6.0 | 350 | 30m/100m |
| 8.0 | 5.5 | 350 | 30m |
| 9.0 | 6.0 | 300 | 30m |
| 10.0 | 7.0 | 300 | 30m |
| 10.0 | 8.0 | 220 | 30m/100m |
| 11.0 | 8.0 | 200 | 30m |
| 12.0 | 9.0 | 250 | 30m |
| 12.0 | 10.0 | 200 | 30m |
TECHNICAL INFORMATION
- Temperatures: -35°C to +70°C. Occasional use up to 120°C. Brittle point: -70°C. *
- Manufactured from prime engineering materials, which conform to RoHS & WEEE Directives
- Produced to exacting tolerances
- Tolerances conform with BS5409 Parts 1 or 2
- Dimensional tolerances and raw materials conform with SAEJ844 3A (Un-reinforced) & DIN 73378/DIN 74324-1)
- Remarkably stable
- Excellent mechanical strength
- Good durability when used at a wide range of temperatures and pressures
- Resistant to the crushing, cracking, abrasion and work hardening associated with the vibration of machinery
- Good resistance to a wide range of chemicals
- The material is heat and light stabilised making it ideal for a variety of outdoor uses
- Lightweight
- Very flexible
- Good bend radii
- Suitable with both the latest push-on fittings and the more conventional compression fittings.
PNEUMATIC POLYURETHANE TUBE
| O/D (mm) | I/D (mm) | PSI | Coil Length |
| 4.0 | 2.5 | 400 | 30m/100m |
| 5.0 | 3.0 | 400 | 30m/100m |
| 6.0 | 4.0 | 350 | 30m/100m |
| 8.0 | 6.0 | 350 | 30m/100m |
| 8.0 | 5.5 | 350 | 30m |
| 9.0 | 6.0 | 300 | 30m |
| 10.0 | 7.0 | 300 | 30m |
| 10.0 | 8.0 | 220 | 30m |
| 11.0 | 8.0 | 200 | 30m |
| 12.0 | 9.0 | 250 | 30m |
| 12.0 | 10.0 | 200 | 30m |
TECHNICAL INFORMATION
- Temperatures: -50°C to +80°C. Occasional use up to 100°C
- Used in pneumatic control systems where flexibility and ease of handling are required
- Remains extremely flexible even at low temperatures
- Wide operating temperature range
- Excellent resistance to kinks and flattening and gives a minimum kink memory
- Produced without the use of plasticisers, so it will not work harden with use
- Excellent resistance to abrasions, most gases, many solvents, petrol and other hydrocarbons
- Designed to operate with a range of the most popular push-fit connectors
- Available in Natural, Black, Red, Green, Blue & Yellow
Looking for a small quantity? Buy online now at www.transamshop.co.uk
You can buy as little as 30m at our online shop today, for delivery tomorrow.